SSE Technologies has developed a portable barcode checker that allows you to compare two bar codes against each other to make sure that they match. This is very useful in packing operations to insure that the entire correct product is put into a carton. QC applications can also benefit from comparison checking to ensure the entire bar code numbers match.

• Accurate - No reading errors
• Simple - No requirement for trained operator
• Veratile - 1D and 2D Barcode Versions
• Convenient - Portable one handed operation
• Two modes of operation are available.

Mode 1-Continuous Comparison

•2 boxes - Bar Code A and Bar Code B

•Scan bar code A.

•Scan barcode B.

•"Good" beep and green display on a match.

•Audible alarm and red display on mismatch.

•In this mode all subsequent scans are compared to A and cause either a good or bad sound and red or green accordingly.

•This mode compares multiple Bs to A

Mode 2-Erase After Compare

•In this mode, you scan A, then B and you get a good or bad sound and corresponding color. The display is then cleared so that the next scan populates A to start a new cycle.

Compare A and B Application-Data Logging Option

In addition to the Compare A and B application stand alone functionality described above, SSE offers a data logging option that collects the following data:

1-Barcode Number Scanned As “A”
2-Barcode Number Scanned As “B”
3-Match (True) –Mis-Match (False)
4-Time and Data Stamp
5-Pass Count Total
6-Fail Count Total
Example of ScanHistory.csv data

 
This option stores the data in the portable unit and then allows this data to be transferred to the PC as a .CSV (Excel) file via the MS Active Sync utility.

Golden Bar Code Comparison Checker versions:

• Linear 1D Codes Only- GB12A: $1,195.
• 2 D Codes and 1D Codes- GB12B: $1,495
• HD 2D Codes and 1D Codes- GB12BHD: $1,595.
• Data logging option - Additional $250

For ordering and technical support call our applications staff at:
(800) 729-2444